Order a sculpture

I can sculpt the bust or bas-relief of your loved one, from life or from photographs, even old ones: you see the sculpture in clay, I correct it according to your comments, then it is cast in bronze.

Steps · Photos · Materials · Prices · Questions · Gifts

The steps

  1. First contact: you describe the project to me (type of work, size, material, occasion) and we agree on the price.
  2. Sitting or photographs: a 3- to 4-hour sitting, during which I take photographs so I can continue without the model; or your photographs, even from old albums. I receive clients at my studio on Île d'Orléans, by appointment, or I travel anywhere in Eastern Canada (Quebec, Ontario and the Maritimes).
  3. Clay: about twenty hours at most. I send you photographs and make corrections based on your comments.
  4. Approval: you pay 50% once you are satisfied with the clay.
  5. Moulding and casting: I make the mould myself and retouch the wax; the bronze is cast at the Fonderie d'art d'Inverness (ceramic, pouring, polishing, patina). How it works
  6. Delivery: the balance is payable on delivery. The bust is fitted with threaded anchors; the granite base, the pedestal and the installation are the client's responsibility.

From photographs, even old ones

Bas-relief: a single viewpoint is enough; two old photographs often do the job. Bust: ideally, a series of close-ups of the face (front, three-quarter and profile views from both sides, three-quarter rear, back, from above and from below), against a contrasting background, without glasses. If photographs are scarce or very old, I can deduce the profile.

Living person: in addition to the sitting, if one is possible, I take the photographs myself from every angle: front, both profiles, 45 degrees, back, from above and from below.

Paper photographs of a deceased person: if your photographs are not digitized, I can photograph them myself to brighten them and work from them. I delete these copies after two years.

Diagram: the photo angles for a bust. Seen from above: front, three-quarter on both sides, both profiles, rear three-quarter on both sides and back. Seen from the side: from above, at eye level and from below.

Materials

MaterialAppearanceOutdoorsPrice
Cast bronze (recommended)Solid metal, patinaYes, lasts for generationsReference price (100%)
Cold-cast bronzeBronze powder and resin, polished and waxed surfacePossible, but less durableAbout 60%

What is the difference?

Cast bronze is real metal. Over the clay, I make a silicone mould covered with a plaster jacket. A quarter-inch layer of wax that reproduces the work is cast in this mould; I retouch this wax myself, then add the pouring channels. The Fonderie d'art d'Inverness then builds a ceramic shell over the wax. When heated, the shell empties of its wax, making room for the molten bronze. The piece is then polished and patinated. This is the method used for the statues in our parks: it lasts for generations, outdoors as well as indoors.

Cold-cast bronze: I cast it myself, at the studio, in the same mould. I pour in a mixture of resin and bronze powder, close the mould and turn it in every direction, in a rotational moulding device I built, so that the mixture covers the whole surface. After two coats, I fill the piece with resin, without bronze powder. Its polished and waxed surface looks like bronze and keeps every detail of the clay. It costs about 60% of the price of cast bronze. It can go outdoors, but it does not last as long: for outdoor use, I recommend cast bronze.

Indicative prices for 2026

All prices are plus taxes. They vary with the price of bronze, the cost of silicone for the mould and the complexity of the subject. The exact price is set with you before work begins.

Cast bronze workHeightPrice
Bust at 80% of life size12 to 15 in. (30 to 38 cm)$8,000 to $10,000
Life-size bust, with part of the torso20 to 24 in. (50 to 60 cm)$10,000 to $15,000
Bust at 133%28 in. (70 cm)about $23,000
Bas-relief (face with a little of the torso)12 in. (30 cm)from $2,600
Monument, statuePrice on request

Cold-cast bronze: about 60% of the price in bronze. Reproductions: about 60% of the price of the original. Prices in Canadian dollars, plus taxes.

Frequently asked questions

How much does a bronze bust cost?

In 2026, from $10,000 to $15,000 for a life-size bust with part of the torso, from $8,000 to $10,000 at 80% of life size, and about $23,000 at 133%.

How much does a bas-relief cost?

From $2,600 in bronze for 12 in. (30 cm) in height: a simple face with a little of the torso.

When do I pay?

50% when the clay is approved, the balance on delivery.

How long does it take?

At least four months before delivery, for a bust as well as for a bas-relief. For a monument, often a year.

Can you make a bust of a person who has died?

Yes, from your photo albums. I show you the clay so that you are satisfied with the likeness.

Can cold-cast bronze go outdoors?

Yes, but it is less durable: I recommend cast bronze for outdoor use.

Are the pedestal and installation included?

No, they are the client's responsibility.

Can I order several copies?

Yes. A reproduction costs about 60% of the price of the original.

Do you make animal portraits?

Yes, on request.

Giving a sculpture

Retirement, birthday or anniversary, company founder, tribute to a loved one: the sculpture can be made from photographs, discreetly. Allow at least four months before the date. A bas-relief is the most affordable gift; a reproduction for each of the children costs about 60% of the original.

Request a quote